Our portfolio gallery

Our work, afloat and in the loft. A few of our favorite projects. Each project’s story is in the Logbook.

The flybridge aft settee with its six new cushions in Sunbrella Upholstery Heritage Indigo.
All French seams, zippers half-way around the boxing.Full screenLogbook entry
The varnished wood motor cruiser in its boathouse with the aft deck cover in place.
The aft cover and new window in service under the boathouse roof.Full screenLogbook entry
The aft deck under the cover, a teak table and chairs, light coming through the new window.
The aft deck seen in a new light.Full screenLogbook entry
The aft side of a navy canvas and clear vinyl enclosure on a sailboat at the dock, with a white Lifesling bag on the rail.
The aft enclosure, seen from the dock.Full screenLogbook entry
The new off-white vinyl helm cushion sitting on the wooden lid of the steering box, beside the wheel.
Shaped to the lid on all four sides and snapped down with straps.Full screenLogbook entry
The new aft enclosure on the boat, charcoal lower panels and clear windows, with vertical straps between the sections.
The new enclosure in place at the dock.Full screenLogbook entry
The helm seat and a wall bolster installed on the boat, white with charcoal diamond quilting.
Installed: the helm seat and bolster.Full screenLogbook entry
The finished white quilted tote standing on a bench, with grey straps, three twist-lock closures and a tan base.
The finished tote, with three hand-set DOT twist locks.Full screenLogbook entry
The open tote seen from above, its grey quilted liner and bound seams visible, a hand holding the rim.
Inside, the quilted liner and bound seams. It works open or closed.Full screenLogbook entry
Shock cord loops from the cover's lower edge to the stainless rail on the varnished transom.
Custom new shock cords to the transom’s teak rail tensions the lower edge.Full screenLogbook entry
Shock cord passing through a 316 stainless steel lashing hook on the teak rail.
Where the cord meets the rail. A new 316 stainless steel lashing hook.Full screenLogbook entry
Two navy Sunbrella panels cut for cushion tops on the loft bench, foam blocks behind them.
The first Sunbrella Heritage Indigo cushion panels precisely cut to fit.Full screenLogbook entry
A cushion cover inside out on the bench, its zipper sewn into the boxing panel and fabric tape reinforced French seams visible.
The zipper set into the boxing, French seams reinforced; seen from inside.Full screenLogbook entry
Cushion cover detail: a zipper placket to hide the ends of the zipper cleanly.
Cushion cover detail: a zipper placket to hide the ends of the zipper cleanly.Full screenLogbook entry
A needle and thread closing the last of a seam by hand, close up on navy fabric.
French seams closed by hand on the inside for a fine finish on the outside.Full screenLogbook entry
A finished seat cushion from above, one corner notched to clear the bimini corner post.
A notched cushion to fit around a bimini post.Full screenLogbook entry
A view through the enclosure glass of two helm seats and a wall bolster, charcoal diamond quilting on white.
Both helm seats and the bolster aboard.Full screenLogbook entry